Los Angeles Fire Protection

There are many steps to have a fire protection system installed in your business, commercial building or residence. We provide information on the stages involved on installing a fire protection system.

Los Angeles Fire Protection Design

It all starts with Design. In Los Angeles we are able to Design your Fire Protection System. The design of your fire protection system will be completed by a Licensed Fire Protection Contractor and/or a Fire Safety Engineer. Your home, commercial building, office or structure will be measured, the fire dangers will be evaluated, evacuation routes will be drawn, where to install fire heat detector alarms, or smoke and fire alarms. Los Angeles Fire Protection Design

Los Angeles Fire Protection Engineering

Engineering your Fire Protection System in Los Angeles will be completed by a Fire Protection Contractor and/or Fire Safety Engineer. Engineering your fire protection system consists of knowing Federal, State, and City Fire Codes, Rules and Regulations, any Health and Safety Codes, Rules, and Regulations and how to properly configure the fire protection system to work at preventing or extinguishing the fire. Los Angeles Fire Protection Engineering

Los Angeles Fire Protection Estimates, Bids, Quotes, Costs

Obtaining a Bid, Quote, or Estimate in Los Angeles for a Fire Protection System allows you to see how much cost will be to install a fire sprinkler system and an idea of what is needed to build a fire protection system for your home, office, commercial building, or structure. Los Angeles Fire Protection Bids, Estimates, and Costs

Los Angeles Fire Protection Installation

Installing a Fire Protection System into your home, office, commercial building, or structure allows you to rest easier, and gives peace of mind, knowing that your family, friends, and/or business clients will be safer from the hazards of fire. Installation of the fire protection system in Los Angeles will be completed by Fire Protection Contractors and/or Fire Safety Engineers. Installation will occur after measurements are taken, fire hazards evaluated, evacuation routes planned, and fire alarm placement in your home or commercial facility. Los Angeles Fire Protection Installation

Los Angeles Fire Protection Testing

Testing your Fire Protection System in Los Angeles will vary depending on the fire protection system you have installed. Testing can be as simple as making sure a fire or smoke alarm will buzz, or as complex as pressure testing the fire sprinkler lines. Fire Protection Contractors and/or Fire Safety Engineers are able to test your fire protection system and make sure you are complying with all Federal, State, and City Fire Codes, Rules and Regulations and Health and Safety Codes, Rules, and Regulations. Los Angeles Fire Protection Testing

Los Angeles Fire Protection Inspection

Fire Protection Inspections are done in Los Angeles primarily to ensure the fire protection system is functioning properly (such as smoke alarms tests). There are many components that create a fire protection system, fire control valves, fire sprinklers, sprinkler heads, etc… some of these systems can be inspected by you regularly and some will require an inspection to be completed by a Fire Safety Engineer and/or a Fire Protection Contractor. Los Angeles Fire Protection Inspections

Los Angeles Fire Protection Maintenance

To keep your Fire Protection System functioning properly in Los Angeles you will need to complete routine Maintenance. Without proper fire protection maintenance your fire protection system may fail to operate, just like a car without an oil change. Some components of the fire protection system will be able to be maintained by you, but the majority of maintenance will be required to be completed by a Fire Safety Engineer and/or Fire Protection Contractor. Los Angeles Fire Protection Maintenance

Los Angeles Fire Protection Repair

When your Fire Protection System fails to operate or function properly you will need to Repair your fire protection system. In Los Angeles a Fire Protection Contractor and/or Fire Safety Engineer will be able to evaluate the fire protection system, find the areas that are in need of maintenance or repair, and fix the problem. Los Angeles Fire Protection Repair

Los Angeles Fire Protection Remodel

Remodeling a Fire Protection System in Los Angeles is the process when your existing fire protection system needs to be updated and brought up to Federal, State, and City Fire Codes, Rules and Regulations as well as Health and Safety Codes, Rules and Regulations. The existing fire protection system will be evaluated, fire sprinklers, sprinkler heads, control valves, evacuation routes, as well as fire detector alarms and smoke alarms. The remodel of the fire protection system will be rebuilding the existing system sometimes from the ground up to ensure you meet or exceed Fire, Health and Safety Codes, Rules, and Regulations. Los Angeles Fire Protection Remodel

Los Angeles Fire Protection Retrofitting

Retrofitting a Fire Protection System in Los Angeles, is the process of adding a fire protection system to an existing home, commercial building or structure that does not have any fire protection present. The Fire Protection Contractor and/or Fire Safety Engineer will evaluate the existing fire dangers, walls, water supply, and blueprints of the building. Their job is to ensure a more than adequate fire protection system allows fire alarms to notify you of the fire, easy evacuation routes to escape harm’s way, will help extinguish the fire, and help prevent fires from occurring. Los Angeles Fire Protection Retrofitting

Los Angeles Fire Protection Certification

In Los Angeles your Fire Protection Certification, means that a Fire Protection Contractor and/or Fire Safety Engineer that has been skilled, trained, and is well aware of Health, Safety, Federal, State, and City Fire Codes, Rules, and Regulations. The Fire Safety Engineer and/or Fire Protection Contractor have minimum requirements of the following. Los Angeles Fire Protection Certification

Los Angeles Fire Protection Certification

Los Angeles Fire Protection

Certification

Los Angeles Fire Protection Certification

In Los Angeles your Fire Protection Certification, means that a Fire Protection Contractor and/or Fire Safety Engineer that has been skilled, trained, and is well aware of Health, Safety, Federal, State, and City Fire Codes, Rules, and Regulations. The Fire Safety Engineer and/or Fire Protection Contractor have met the minimum requirements required by Federal, State, Health, Safety, and City Fire Codes, Rules and Regulations.

Who Needs a Fire Protection Certification in Los Angeles

Any fire protection company that wishes to install fire protection systems and/or fire sprinklers will be required by Los Angeles to be certified by NITC prior to installing a fire protection system

What Fire Protection Certification Requires in Los Angeles

Generally in most cities like Los Angeles to be Certified as a Fire Safety Engineer, or Fire Protection Contractor they must:

To qualify for this examination you must meet the following requirements:

1) Four years of full-time paid experience as a journey-level Fire Sprinkler Fitter installing fire sprinklers and standpipe

systems in commercial facilities using the National Fire Protection Association Standards NFPA 13, 2002 edition.

2) Four years of full-time paid experience as a Fire Sprinkler Inspector having approval authority on commercial facility

fire sprinkler and standpipe installations using the National Fire Protection Association Standards NFPA 13, 2002

Please visit http://www.nationalitc.com/ for more information regarding Fire Protection Certification.

Where is a Fire Protection Certification Required in Los Angeles

Most States, and Cities like Los Angeles, require that anyone that installs a fire protection system be qualified, skilled and have years of experience to work in the fire protection industry.

When Do You Need a Fire Protection Certification in Los Angeles

Most States and Cities including Los Angeles, have requirements that must be met in order to sell, install, or create a fire protection and/or fire sprinkler system. These minimum requirements help safeguard you, as it requires the fire protection company to be well educated and skilled in the arena of preventing fires.

Why Choose a Certified Fire Protection Company in Los Angeles

Choosing a Fire Protection Company that has its certification helps ensure when installing a fire protection system, that it will operate and function properly and you will also comply withal Federal, State, Health, Safety, and City Fire Codes, Rules, and Regulations

How To Get a Fire Protection Certification in Los Angeles

The fire protection company that you choose to work with is creating a system that is designed to save lives and possessions. The fire protection certification states the company installing your fire protection system has been educated, skilled, and is aware of fire codes. Therefore it allows you to rest better knowing that the fire protection system was designed by a fire safety engineer and/or fire protection contractor that knows how to protect you from the event of fire.

Los Angeles Fire Protection Retrofitting

Los Angeles Fire Protection

Retrofitting

Los Angeles Fire Protection Retrofitting

Retrofitting a Fire Protection System in Los Angeles, is the process of adding a fire protection system to an existing home, commercial building or structure that does not have any fire protection present. The Fire Protection Contractor and/or Fire Safety Engineer will evaluate the existing fire dangers, walls, water supply, and blueprints of the building. Their job is to ensure a more than adequate fire protection system allows fire alarms to notify you of the fire, easy evacuation routes to escape harm’s way, will help extinguish the fire, and help prevent fires from occurring.

Who Needs a Fire Protection Retrofit in Los Angeles

If you are required to install a fire protection system to any building or structure that does not currently have a fire protection system installed the fire protection system will require that a retrofit be completed.

Industrial Facilities, Commercial Buildings, Home Residences are all able to have a fire protection system retrofitted into their structure.

What is a Fire Protection Retrofit in Los Angeles

If you have a home residence, commercial building or facility that does not currently have a fire protection and/or fire sprinkler system and is in need of one. You will need to retrofit the existing building, meaning you will have to work around the existing structure, water mains, evacuation routes, etc…Retrofitting means adding a fire protection and/or fire sprinkler system to a commercial building, residence, structure or facility that never had a fire protection system.

Where is a Retrofit Required in Los Angeles

If you are required by Federal, State, the City of Los Angeles, Health, Safety Fire Codes, Rules, and Regulations to protect your patrons, inventory and facility from the dangers of fire. A retrofit may be necessary if the commercial building or facility does not currently have an installed fire protection and/or fire sprinkler system.

When to Retrofit a Fire Protection System in Los Angeles

You would retrofit a fire protection system into your commercial building or facility when the structure does not currently have an installed fire protection and/or fire sprinkler system.

When required by Federal, State, the City of Los Angeles, Health, Safety Fire Codes, Rules, and Regulations to protect your patrons, inventory and facility from the dangers of fire.

When you decide that you want to protect your family, friends, home, possessions, and valuables from the dangers of fire

Why Retrofit a Fire Protection System in Los Angeles

To protect the occupants, structure, commercial building, possessions, valuables and inventory from the dangers of fire.

How to Retrofit a Fire Protection System in Los Angeles

You will be able to retrofit a fire protection system into any commercial building, home residence, facility or structure that does not currently have installed fire protection and/or fire sprinklers by contacting a fire safety engineer and/or fire protection contractor.

Los Angeles Fire Protection Remodeling

Los Angeles Fire Protection

Remodeling

Los Angeles Fire Protection Remodeling

Remodeling a Fire Protection System in Los Angeles is the process when your existing fire protection system needs to be updated and brought up to Federal, State, and City Fire Codes, Rules and Regulations as well as Health and Safety Codes, Rules and Regulations. The existing fire protection system will be evaluated, fire sprinklers, sprinkler heads, control valves, evacuation routes, as well as fire detector alarms and smoke alarms. The remodel of the fire protection system will be rebuilding the existing system sometimes from the ground up to ensure you meet or exceed Fire, Health and Safety Codes, Rules, and Regulations.

Who Should Remodel a Fire Protection System in Los Angeles

You should remodel your existing fire protection system in the event that additional fire prevention coverage is needed, the law requires, keeping up with Federal, State, the City of Los Angeles, Health and Safety Fire Codes, Rules, and Regulations.

Industrial Facilities, Commercial Buildings, and Home Residences are able to have a fire protection system remodeled in their structure, most importantly to keep safe from the dangers of fire.

What is Remodeling a Fire Protection System in Los Angeles

Remodeling a fire protection system occurs when the existing fire protection and/or fire sprinkler system is in need of updates and repairs or both. The existing system is evaluated, the fire dangers are assessed, evacuation routes are examined, and fire alarm placement is considered. The fire safety engineer and/or fire protection contractor will then begin remodeling removing the old, or adding onto the existing fire protection system until it suitably fits the needs of the owner.

Where Remodeling Fire Protection is Required in Los Angeles

The remodel of your fire protection system is generally initiated by you, to stay current or exceed Federal, State, the City of Los Angeles, Health and Safety Fire Codes, Rules, and Regulations.

Many people choose to remodel simply to maintain or increase their fire protection coverage. Where updating their fire protection system with leading manufacturer’s parts, components, and fire alarms. Ensuring they will be able to rest easier and have peace of mind.

When to Remodel a Fire Protection System in Los Angeles

When should you remodel a fire protection system? You should remodel a fire protection system when the fire protection coverage is inadequate or there are new fire dangers present that lack fire protection coverage.

Why Should You Remodel a Fire Protection System in Los Angeles

To have the best absolute fire coverage for your home residence, commercial building, industrial facility, or structure you will want to maintain, inspect, test, and upgrade the system as time goes by and new fire dangers become present, or to have a more effective fire protection system.

How to Remodel a Fire Protection System in Los Angeles

The easiest part of remodeling your fire protection system is contacting a fire safety engineer and/or fire protection contractor and obtain an estimate of costs to remodel. Once you make a decision on which Fire Protection Company to work with the remodel may begin.

Los Angeles Fire Protection Repair

Los Angeles Fire Protection

Repair

Los Angeles Fire Protection Repair

When your Fire Protection System fails to operate or function properly you will need to Repair your fire protection system. In Los Angeles a Fire Protection Contractor and/or Fire Safety Engineer will be able to evaluate the fire protection system, find the areas that are in need of maintenance or repair, and fix the problem.

Who Repairs Fire Protection Systems in Los Angeles

Your fire protection system will be repaired by a fire protection contractor and/or a fire safety engineer in Los Angeles. If repairs are required to fix, test, maintain, or repair a fire protection system; they should be completed by a certified fire protection contractor or licensed fire safety engineer.

What is Repairing a Fire Protection System in Los Angeles

Repairing a fire protection system occurs in the event the system fails to operate or function properly. The fire protection system is a network of pipes, fire sprinklers, sprinkler heads, control valves, fire control centers, heat detector alarms, smoke alarms, and fire alarms.

Where Repairing a Fire Protection System is Required in Los Angeles

To comply with or exceed Federal, State, Los Angeles, Health and Safety Fire Codes, Rules, and Regulations you may need to periodically make repairs on your fire protection system.

There are many parts that make the network for a fire protection system its main components, electrical, plumbing, mechanical and electronic. Due to the nature of any equipment it will age with time, accident or misuse and will be in need of repair. Contact a fire safety contractor and/or a fire safety engineer to repair the fire protection system if it is malfunctioning.

When Should You Repair a Fire Protection System in Los Angeles

Any time your fire protection system runs into a problem or malfunctions. Contact a fire protection contractor and/or a fire safety engineer to immediately come out to evaluate the issues and make any necessary repairs to your fire protection system.

Why Repair a Fire Protection System in Los Angeles

When your fire protection system is in need of repair it will not function properly. This may cause the system to fail. If there is a fire, depending on the part or parts of the fire protection system that are failing or having issues, the fire may spread into undesired areas with catastrophic consequences. 

How to Repair a Fire Protection System in Los Angeles

How repair a fire protection system in Los Angeles, is fairly simple…Call a professional. A fire protection contractor and/or fire safety engineer will have the education, skill, and training to evaluate the issues the fire protection system is having and make any necessary repairs.

Los Angeles Fire Protection Maintenance

Los Angeles Fire Protection

Maintenance

Los Angeles Fire Protection Maintenance

To keep your Fire Protection System functioning properly in Los Angeles you will need to complete routine Maintenance. Without proper fire protection maintenance your fire protection system may fail to operate, just like a car without an oil change. Some components of the fire protection system will be able to be maintained by you, but the majority of maintenance will be required to be completed by a Fire Safety Engineer and/or Fire Protection Contractor.

Who Maintains a Fire Protection System in Los Angeles

Maintenance to your fire protection system should be completed by a fire safety engineer and/or a fire protection contractor. The fire safety engineer and/or fire protection contractor is skilled, educated, and well trained to maintain, fix, or repair your fire protection system

What is Maintenance on a Fire Protection System in Los Angeles

The fire protection system is made of many parts, possibly an intricate network of pipes, fire sprinkler heads, fire sprinklers, pressure control valves, and fire alarms. Maintaining a fire protection system simply is a series of tests, inspections, and routine maintenance that is done on your fire protection system to ensure all parts of the system are working and functioning properly.

Maintenance is generally a review of the following parts that make a fire protection system:

·         Heat Detector Alarms and Smoke Alarms

·         Wet and Dry Pipe Fire Sprinklers

·         Deluge Fire Sprinkler Systems

·         Fixed Water Spray Fire Protection Systems

·         High Expansion Foam Fire Sprinkler System

·         Standpipe Fire Protection Systems

·         Fire Hydrants, Monitors and Fire Pumps

·         Dry and Wet Chemical Fire Protection Systems

·         Carbon Dioxide Fire Protection Systems

·         Portable Fire Extinguishers

Where Maintenance is Required on a Fire Protection System

Federal, State, Health, Safety and the City of Los Angeles Fire Codes, Rules and Regulations will require that you maintain your fire protection system and that your fire protection system function properly. Not to mention you will want the fire protection system to be in optimum condition to protect you, loved ones and the building or structure it was designed for.

When to Maintain a Fire Protection System in Los Angeles

The fire protection system should have a schedule where tests, inspections, and maintenance will be completed regularly. Check with your fire safety engineer or fire protection contractor for a maintenance list and schedule if you do not already have one. 

Why Maintenance a Fire Protection System in Los Angeles

Your fire protection system in most cases is your only line of defense in the event of a fire, it warns you to evacuate, the fire sprinklers turn on, and sprinkler heads extinguish the fire and stop the fire from spreading. Maintaining your fire protection system helps to ensure you will have proper operation in the event of a fire.

How to Maintenance a Fire Sprinkler System in Los Angeles

The easiest part of maintaining your system would be to contact a fire safety engineer and/or a fire protection contractor to maintain, test and inspect your fire protection system. The fire safety engineer and/or fire protection contractor are well educated in the routine tests, inspections and know who to properly operate and maintain your fire sprinkler system.

Los Angeles Fire Protection Inspection

Los Angeles Fire Protection

Inspections

Los Angeles Fire Protection Inspection

Fire Protection Inspections are done in Los Angeles primarily to ensure the fire protection system is functioning properly (such as smoke alarms tests). There are many components that create a fire protection system, fire control valves, fire sprinklers, sprinkler heads, etc… some of these systems can be inspected by you regularly and some will require an inspection to be completed by a Fire Safety Engineer and/or a Fire Protection Contractor.

Who Inspects the Fire Protection System

The fire protection system should be periodically tested, inspected, and repaired when needed to ensure that the fire protection system is functioning properly. Generally fire protection inspections will conform to the NFPA 25 Standard for fire protection inspections, testing and maintenance.

What is a Fire Protection Inspection

An inspection of your fire protection system is a series of checks, tests, and visual inspections to make sure all components of the fire sprinkler system work properly.  Such as inspecting a fire protection smoke alarm to ensure it works when smoke is present.

Inspecting your fire protection system should be regularly completed and a schedule established for weekly, monthly, quarterly, semi-annual, annual and 5 year inspections to your fire protection system. These inspections only ensure that your fire protection, fire sprinklers, sprinkler heads, fire alarms, heat detection alarms, control valves, and any other components are all operating and functioning properly.

Where Do Fire Protection Inspections Occur

An inspection of your fire protection system, will occur at your commercial building, home residence, office, structure or facility, that has an installed fire protection system. The fire safety engineer or fire protection contractor will run a series of checks, tests, inspections both visual and mechanical to ensure the fire protection system is operating and functioning.

When Fire Protection Inspections Take Place

The inspections of the fire protection system should take place in regular intervals, such as weekly, monthly, quarterly, semi-annual, yearly and every 5 years. Some of these routine checks can be completed by you, others will require the services of a fire safety engineer and/or fire protection contractor.

Why Inspect a Fire Protection System

You should routinely inspect, test, check and maintain your fire protection system to ensure all parts of the fire protection system operate and function properly. A poorly operating fire protection system may not operate correctly, meaning the fire could spread, the fire alarms could be broken, etc….you need to be alarmed of the fire, given time to evacuate, have the fire sprinklers extinguish and stop the fire from spreading, Therefore you will want a safe and working fire protection system, regularly tested, inspected, maintenance and ready to extinguish fires..

How Can I Inspect a Fire Protection System

Some of these visual and physical inspections to your fire protection system will be completed by you. However due to the complexity of the fire protection system we recommend that you contact a fire safety engineer and/or fire protection contractor to evaluate, test, inspect, maintain or repair your fire protection system.

Los Angeles Fire Protection Testing

Los Angeles Fire Protection

Testing

Los Angeles Fire Protection Testing

Testing your Fire Protection System in Los Angeles will vary depending on the fire protection system you have installed. Testing can be as simple as making sure a fire or smoke alarm will buzz, or as complex as pressure testing the fire sprinkler lines. Fire Protection Contractors and/or Fire Safety Engineers are able to test your fire protection system and make sure you are complying with all Federal, State, and City Fire Codes, Rules and Regulations and Health and Safety Codes, Rules, and Regulations.

Who Tests my Fire Protection System

Testing your fire protection system is something you, the fire safety engineer, and/or the fire protection contractor will conduct on a regular basis to ensure the fire protection system will operate and function properly.

What is Testing a Fire Protection System

Testing your fire protection system is a series of checks, both visual and mechanical that helps ensure that the fire protection system, its parts and components are all working. There are guidelines to testing the fire protection system as can be found in NFPA 25, which is the standard for testing your fire protection system.

Testing the fire protection system will depend on what type of fire protection system is installed into your commercial building, home residence, structure, or facility. Fire protection systems are built exclusively for the building they were designed for, as each building has different fire hazards, floor plans, building design. Depending on the components that your fire protection system has testing will vary per each application. We encourage you to test the fire protection system regularly such as weekly, monthly, quarterly, semi-annual, yearly and every 5 years.

Where Fire Protection System Tests Occur

Testing your fire protection system is a series of tests done on each component of the fire protection system. For a standard water based fire protection system testing would occur on the fire sprinklers to ensure proper pressure and no leaks, sprinkler heads to make sure that the heat detector element and sprinkler head are functioning, fire alarms to make sure they are operating correctly and so forth.

When a Fire Protection System Test Should Occur

You should have your fire protection system tested on a regular basis a schedule should be created by the fire protection company that installed the fire protection system. The fire protection system should be receiving weekly, monthly, semi-annual, annual, and 5 year tests. These tests are completed to make sure all components of the fire sprinkler system are operating correctly.

Why Test a Fire Protection System

Your fire protection system is designed to accomplish two goals; save lives and possessions. However your fire protection system needs to operate in order to accomplish these goals. Testing your fire protection system on a regular basis helps ensure that in the event of a fire, your fire protection system will warn you of the fire danger giving you time to evacuate, stop the spread of fire and extinguish the fire.

How to Test a Fire Protection System

You should conduct testing your fire protection system according to the schedule given to you by the fire protection company that installed your fire protection system according to NFPA 25 guidelines. If you do not have a schedule for proper testing of your fire protection system, we encourage you to contact a fire safety engineer and/or a fire protection contractor to establish a set schedule to properly test, inspect and maintain your fire protection system.

Los Angeles Fire Protection Installation

Los Angeles Fire Protection

Installation

Los Angeles Fire Protection Installation

Installing a Fire Protection System into your home, office, commercial building, or structure allows you to rest easier, and gives peace of mind, knowing that your family, friends, and/or business clients will be safer from the hazards of fire. Installation of the fire protection system in Los Angeles will be completed by Fire Protection Contractors and/or Fire Safety Engineers. Installation will occur after measurements are taken, fire hazards evaluated, evacuation routes planned, and fire alarm placement in your home or commercial facility.

Who Should Install a Fire Protection System

Anyone who is concerned about the dangers of fire and wish to protect their family, loved ones, valuables, prized possessions, home, business, office, commercial building or facility should install a fire protection system. If Federal, State, Health, Safety or the City of Los Angeles Fire Codes, Rules, and Regulations requires that you install a fire protection system.

A properly installed fire protection system will not only protect lives, it will help prevent fire from spreading or becoming dangerous. Helps protect family, friends, loved ones, or patrons of your facility from the harm of fire.

What Installing a Fire Protection System Does

Installing a fire protection system will accomplish several goals; warn you in the event of fire, give you time to evacuate, fire sprinklers and sprinkler heads help stop the fire from spreading and extinguish the fire. Some fire protection system installations will also have a fire control monitor which enables the fire protection system to contact the local fire department in the event of a fire.

Where Should I Install a Fire Protection System

Fire protection systems can be installed in your home, commercial building, schools, museums, libraries, public facilities, parking structures, etc… A fire protection system should be installed anywhere there is a concern of fire spreading rapidly, where there are flammable materials present and where required by Federal, State, Health, Safety, and the City of Los Angeles Fire Codes, Rules, and Regulations.

When to Install a Fire Protection System

The best time to install a fire protection system is now; fire is unpredictable and can spread rapidly. Over time we have learned that fire can cause havoc to a home, office or public facility. London encountered a fire that nearly burnt half the city down; New York has had the same encounters with fire. A fire protection system installed into any building or facility allows the fire protection system time to extinguish a fire and assists your local fire department ensuring that fire will not jump from your building to another.

Why Install a Fire Protection System

Having a fire protection system installed gives you peace of mind. Fire can be devastating it has consumed lives, possessions, valuables, inventories, homes, businesses, libraries, schools, museums and the list goes on. A fire protection system properly installed will protect the building and fire hazards throughout the building so that in the event of a fire the fire protection system initiates action fire alarms warn you to evacuate and generally contact the local fire department, the fire sprinklers engage, and sprinkler heads help stop the spread of fire, and help to extinguish the fire.

There are Federal, State, Health, Safety and the City of Los Angeles Fire Codes, Rules, and Regulations that you must meet or exceed if you are a public or commercial facility. Installing a fire protection system allows you to meet or exceed these guidelines set forth by governing agencies to help protect life and possessions.

How to Install a Fire Protection System

Installing a fire protection system should not be completed without proper training, education, and practice in the field. A fire protection contractor and/or fire safety engineer has the education, training, and skill needed to properly design, engineer and install the fire protection system. If you are in need of installing a fire protection system we encourage you to contact a fire protection company.